In order to be able to diagnose and repair your Whirlpool 29 inch electric dryer when it won't start, you will need to know what parts to check in the starting circuit

Let me explain to you how the electricity flows through the dryer during the starting circuit.

Electricity flows from the wall outlet through the power cord to the terminal block L1 & L2 terminals.

From L1 at the terminal block, electricity flows to the timer.

From the timer electricity flows to the thermal fuse. From the thermal fuse electricity flows through the start & run windings in the motor

From the motor electricity flows to the start switch and it is waiting until the start switch is pushed or turned. When the push switch is turn on electricity flows through the switch to the door switch.

if the door switch is close, then the dryer motor should start running.

So, as you could see, there are many parts that have to be working properly in order for the dryer to be able to start.

1. The voltage at the terminal block

2. The power cord

3. The timer

4. The thermal fuse

5. The motor

6. The start switch

7. The door switch

You will need to use your multimeter to test all those parts until you find which one is preventing the dryer from starting.

We have all the videos necessary to show how fix your dryer when is not starting.
 

100% Money Back Guarantee
We guarantee that our videos will help you fix your dryer
or we will refund you your money back, no questions asked