Angel,
Your videos were perfect. I was able
to diagnose the problem (clutch
assembly) and repair it. I went back to
the videos several times to make sure I
was putting the parts together
correctly. Now my wife is sending me to
the store for Laundry Detergent!
Thanks for your videos and e-mail
support. Couldn't have done it without
you.
Greg
Angel
I had to take the motor out...put the
metal blower motor nut (that was stuck on
the shaft) in a vice...and used a large
socket to twist the "belt" end of the motor
drive shaft"...until the nut gave way.
I had it all back together and working in
less than 30 minutes. Quiet as ever and
drying loads very quickly now.
Saved me more than $200 and I enjoyed doing
it. Thanks for not only providing GREAT
INSTRUCTIONAL VIDEOS but for giving me
helpful advice as well!
I am on the way to a
rebuilt washer for the price of a clutch
repair and a drive block.
YOU THE MAN.
Could never have done
this on my own.
TKS a million. Or at
least the 500 you saved me
Hello Angel,
Thank you for responding so quickly when I
sent an SOS (I had lost the original link).
With your "GE Washer Not Draining" video,
this 60-year old Grandma got her washer
unplugged and working! Your video was easy
to follow and I appreciated the reminder to
have old towels handy before disconnecting
the hose and drain pipe from the pump.
Thanks again, for helping me help myself
Natalie
Dear Angel,
After reviewing your
video instructions carefully, I was able
to install a belt and blower wheel on my
brother-in-law's dryer. Your prompt
response to my difficulties with the
DVD's has allowed me to repair the dryer
in a timely manner and saved them the
cost of a repairman. I am grateful for
your very generous and professional
service.
Thank you again,
Stanley Kaneshiki
Angel,
Your videos are
increasable. With them I had the confidence
to completely disassemble my washer and
completely clean it out and replace the worn
parts.
It was a challenge to
secure parts in Canada's northern Isolated
reaches but a heck of a load of money saved.
Thanks for walking my
through it.
Grant
Angel,
Your videos are great. You helped me fix
my machine! The best $10 I ever spent.
Best regards,
Dick Crocker
Angel,
I finally
finished my washer repair project! Woo-hoo!
I could NEVER have done it without your
videos! They were invaluable. In addition,
your willingness to assist me via email and
telephone were much appreciated. I posted a
link to your website on all of the washing
machine repair forums, saying that I
couldn't have done the repairs myself
without the video.
Take care
and God bless,
Carol
Angel,
Yes, I received the videos without any
problems. I was extremely impressed
and pleased with them. The best money I have
ever spent. I must admit,
I was a little intimidated with taking the cover
off my washer.
After watching you videos,
I had all the confidence I needed to tear into
the
project. I could not believe how simple it was,
with the help from your
videos.
They were clear, simple,
thorough, and extremely accurate on the
steps involved. The whole project, of replacing
the water intake valve,
took less than 30 minutes and much of that was
due to the tight location
of my machine.
I may have been able to
pull it off without the videos,
but it would likely have been an all day
project, best case, or a rather
expensive service call to a professional.
Great work and thanks to all involved with the
creation of these extremely
helpful videos. Your site is a permanent
bookmark and I will recommend
it to anyone I know that has washer or dryer
problems.
Thanks!
Tom Boucher
Hi Angel,
I got the link straightaway and I as soon as I
played the video, I started to repair of my
Rover washing machine. Thanks to your very
clear instructions, I was able to fix it very
easily. The problem was with the motor coupler,
I had a spare finger and rubber coupler from
last time I had it repaired by a technician who
charged me a lot.
I kept the broken parts, of course only one of
the fingers was broken, the good one I kept as
spare. But I could not remember how he
disassembled and replaced it because it was more
than 5 years ago.
Thanks again for your video! It was the best
money I ever spent! It was so worth it. The
wife also sends her thanks and regards.
You the MAN! More power to the APPLIANCE MAN!
Cheers,
Andy
Angel,
When recently distressed about my dryer
failing I went searching the Internet for tips
on diagnosing the problem. I hated the thought
of hiring a repair man to fix what may be a
$.35 solution (something simple like changing a
fuse).
After being disappointed by the other repair
websites, I was really delighted to find a
self-help downloadable video at a very
reasonable price:
http://washer-dryer-repair-videos.com.
The easy, step-by-step instructions in
the video helped a novice like me nailed
the repair and perhaps saved my marriage. I was
even able to call Angel directly (something
unheard of in today's world of instructional
video producers) and got a quick answer to a
concern I had.
I just wished that Angel was a subject matter
expert on every electronic gadget under the
sun.
Rupert
Virginia
Thanks,
I took apart the drive
train but got stumped on the order of
reassembly for the clutch retainer clip and
thrust washer, your video explained it for
me, thanks for the video.
Alton
Angel,
I received the videos right
away and was able to fix my washer in less than
10 minutes!!!
Thanks again Angel!!!
Tim
Angel,
Yes, I received the videos and they were
fantastic! Detailed but simple to follow.
I went from not having a clue what the
problem was, to having the washer
dismantled, the problem identified (motor
drive coupling), and the washer put back
together in under one hour. Thanks for a
great service!
Brett
Okay, thanks!
Your video was a great help.
Turned out to be the thermal cutoff.
Dave
Thank for your video. I am
not good with fixing things but your video made
it easy and I fixed the dryer by myself and
saved some money. Thanks Angel!
Nomar
Angel,
I downloaded the videos
and view them and repaired the dryer.
Very good service.
Thank you very much,
Oliver
Hi Angel,
Thanks
again for
your help on the phone the other other day.
My new timer switch arrived today and our
washer is as good as new.
Your videos
are great and your customer service is even
better. I won't hesitate to buy your videos
again in the future.
Many
thanks,
Ken Laidl
Angel,
Thanks for getting back to me. I went on line
and purchased the video and was able to find
the problem.
You were right it was not the motor bearings but
the blower wheel.
Your video saved me a bunch of money and kept me
from pulling out what is left of my hair. I will
continue to recommend your videos to all my
friends.
Gusansback
Dear Angel,
Your videos helped me
allot. From taking apart the dryer to
figuring out the problem, a bad gas valve
coil and then fixing it. Everything went
smooth and our dryer is operating as it
should be again.
Rest assured, if any of our
appliances start acting up in the future, I
will definitely be visiting your website
again.
Thanks again,
Channing Kenniker
Angel,
Your videos are awesome
found and fixed problem just like you
said....very easy to follow and i really enjoy
watching on video as it is much easier to watch
someone then do it yourself......oh by the way
saved myself over 120 dollars by doing it
myself.....thanks again
Rich
Angel,
Your video is outstanding!
When our dryer had no heat, we thought about
getting rid of it and buying a new one since it
is 5 years old and the cost of repair would have
been more than its worth.
I searched online and found some information,
but since I didn't know anything about the
inside of a dryer, I didn't know how to check or
repair the problem. After watching your video,
I was able to quickly pinpoint the problem,
which was a bad heating element.
I purchased a new part, installed it in two
minutes and now the dryer is working great! Not
only did I save hundreds of dollars, but I also
have a great sense of accomplishment thanks to
you. May God bless you!
Nelson
Angel,
After 3 weeks without a
washer, piles of dirty clothes, $10 at the
laundromat & a fickle husband, I was tired of
waiting and decided to see if I could fix it
myself.
I found your website and even though my husband
was skeptical, I was confident, especially after
reading your encouraging words of how simple it
could be. I downloaded one video, and read ALL
the other free written information on everything
else.
It was so easy! I was excited! It was the lid
switch! The screw holes were cracked and not
holding it in place. The stores were closed by
then and I used duct tape to hold it in place
and washed 17 loads of laundry.
Still haven't bought the $30.00 part to replace
it yet but I fixed it! NOT MY HUSBAND! ME!
Thank you Angel for all the confidence you gave
me and for your wonderful website, I will be
back and will tell all my friends about you!
You saved us a lot of time and money we didn't
have.
Angel,
Replaced the flame sensor
and the dryer is working- Thank you. My friend
is having problems with his washing machine, I'm
going to hook him up with your web site.
Steven Browne
Angel,
Your videos are such a good idea. I fixed my
dryer for much less than the call-out charge and
you are very reasonable with your prices. Thank
you.
Jim
Angel,
Thanks. Your instructions on the video were
beautiful and we completed the repair of the idler
pulley wheel; the dryer works again without the
high-pitched squeal. I bought the white lithium
grease at AutoZone and the idler pulley wheel at an
appliance store parts department. The whole repair
cost us $30. instead of probably over $100. using
“the Maytag man.” My six-year-old son helped me with
the repair so it was the perfect father/son
activity; and, my wife gave me a kiss when we were
done.
Peter
Hey Angel,
I figured it out. The seal wasn't seated all the
way to the bottom so it was scraping the top of
the outside drum creating too much tension to
spin. It works great thanks to your video. What
other appliances do you have video for? I'll
spread the good word
Thanks for all of your support.
Bill Walsh
Angel,
I purchased your
video on "how to fix a dryer"... bought the parts
and within 1 hour... whalah! fixed... plus i
changed other parts (bearings) while i was replacing
the belt.
Total cost of
belt/bearings plus your video: $25.00
estimate from local
appliance repair shop: $125.00
Saved: $100.00
smackaroos!
Thank-You, the
video was brilliant and I could not have done it
without, I'll be returning if necessary.
Sincerely,
Leanna Keyes
Angel was awesome! Thanks for all the help. He taught me
techniques to trouble shoot my washer inability to
agitate. Was able to confidently learn that it was not a
transmission or motor problem but stripped plastic
Agitator Assembly. Highly recommend his video!!!
Richard
OUTSTANDING instructional videos--will highly recommend
it to anyone with the appliances you service.
Angel,
I received the parts I ordered online and the dryer
seems to be working great. Thanks again for the help.
Here's my testimonial that you can post-
I don't consider myself particularly handy so I wasn't
very confident that I would be able to troubleshoot my
gas dryer that wasn't heating. I came across Angel's
website and watched some sample clips and decided it was
worth spending $10.00 to try to learn it myself. Turns
out it's a lot easier to work on my dryer than I
thought! I had considered just getting a new dryer
because mine was "old" but with Angel's help and his
videos it took me no time to figure out the problem and
fix it for about $25.00 in parts. I highly recommend his
videos and I was very impressed that he responded over
email (even late on a Saturday evening) to answer a few
of my questions.
Thanks again,
Brian
Angel
Yesterday I viewed some of your video clips on a washer
no spin/drain problem and the replacement of the lid
switch for which I had to open up the machine to gain
access. I memorized what I saw, and went over to my
niece's home and tackled the problem head on. I am proud
to say "mission accomplished". I got it working, and
saved my niece some big bucks. Thanks for being out
there and god bless.
AngelI linked up to your site while searching for
info on washer repair. What a source of information you
are. I ordered the DVD on Whirlpool direct drive washer
repair for future reference. I'm a handyman kind of guy
from NYC (Boricua), retired, in Florida con mi gente.
Thanks.
I just wanted to say thanks for the help with the
video. I was able to easily open the washer and
find/fix the problem.
Thanks.
Mark
Angel
I have contacted Maytag for a manual on my dryer to
find out how to replace the belt. they don't have
one... I searched online... tried to use my
brain.... then came you.
thank you so very much for your site and your
videos!!!!!!
and such a great costs!!!!
you are wonderful and I will tell everyone I know
about your site!
thank you thank you thank you !!!
C Mercer
The problem was the exhaust hose.....it runs about 10-12
feet under my house to the outside. I took it off and
rinsed it out with the water hose and a HUGE hunk of
lint came out, probably where it dips. It is aluminum
flexible tubing....THANKS SO MUCH FOR ALL THE HELP!!!!!
It is good to know that there are still people out there
that will help out and save people lots of money with
just a little knowledge and time....You don't know how
much you have helped me....I just had to replace my hot
water heater on the Friday before my dryer messed up on
Sunday......The cost was $550....and I just couldn't
afford a new dryer, must less a service tech
call......Again, THANKS SO MUCH........
Lisa
Angel, Just wanted to let you know the part came
today 1/2 hour later my washing machine was up
and running. Your videos made it simple and I
believe I saved at least a $100.00. Here the
cost of a service call analysis would have been
$96.00 plus the return trip charge, plus the
part and installation charge. I went that
route with my dishwasher repair where I paid
$165.00 for Sears to install a 15 cent plastic
part that was as big as a dime. Your repair
videos are priceless.
Thank you
Eric
|
|
|